3D PDF Converter for Revit

9 Jul

In 2010, I wrote a blog post on using Adobe Acrobat 9 Extended to create 3D PDFs from a Revit model by exporting it to IFC. In 2011, I published the article in AugiWorld. Shortly after the article was published, the 3D PDF world changed. Adobe released Acrobat X and dropped support for every file type except U3D and PRC. Revit doesn’t export to U3D or PRC, so now what?.

Well 3DA Systems has released a Revit plugin – PDF Converter for Revit - that runs in 2012 and 2013 and allows you to create a full page 3D PDF with the click of a button, or export a PRC and using Acrobat X, insert the model into your document.

I received a trial of PDF Converter for Revit and tested it out.

I wrote down two criteria that the PDF Converter needed to meet:

  1. It had to allow me to import the model in to a PDF that I designed, and
  2. It had to export the model data.

No data in the PDF defeats the purpose of a 3D Revit model, and by not allowing me to design where the model is placed in the PDF, it inhibits my uses of the model. I want to create cut sheets and marketing materials. So, my model must import in to these documents.

The 3D PDF Converter met both of these criteria. It did everything that I could do with Adobe 9 Extended, but it also added an add-in toolbar in Revit which allowed for the quick creation of a full page 3D model with a single click.

The plugin installs with a Windows executable and took less than a minute. After launching Revit, the add-in is now available.

AddIn

3DA Systems Add-In

The add-in has three options:

  1. Help – which you should not need.
  2. Create PDF – will create a full page PDF of the {3D} view.
  3. Create PRC – which will create a PRC that can be imported in to Adobe.

I almost always prefer creating a PRC; however, I can see times when I just need to send a model and the page design is irrelevant. For those times, the create PDF button is all you need.

After creating the {3D} View, select Create PDF. You will be prompted to save the file. Select a location and name and save the file. Then you will be able to select the export options and finalize the 3D PDF.

Settings

General Settings. Make sure “METADATA not Included” is unchecked.

When to enable and disable the content

How to Display 3D Content. I check Open Model Tree.

The single most important box to UNCHECK is “Metadata Not Included” in the General Settings Tab. If you check this box, you will lose all of the information and properties associated with your model components. When you click on a wall, it will be highlighted in the model tree, but the data – height, length, material… – will not appear.

That is all you need to do to create a full page 3D PDF: click Create PDF, edit the settings, and done!

To embed your Revit model in to a PDF which has already been created, export the {3D} View to PRC. When you click “Create PRC” you will get the same options window, but only the General tab is available.

Here is my designed PDF that will hold my model.

PDF

Open the PDF in Acrobat X. On the top right menu you can select “TOOLS” and a toolbar will be placed on the right side of the window.

Select “Multimedia” and then “3D.” Your cursor will turn to cross-hairs and you can draw a box where you want the model to go.

You will be asked to select the file. Choose the PRC that you exported from Revit.

That is it. You now have a 3D PDF of your Revit model.

My PDF with the Model

You can share this model and anyone with the free Adobe Acrobat Reader will be able to view the model, cut sections, measure, and see the object properties. As with any PDF, you can lock it down. I added a password to my PDF in the document properties to open the file and to print.

Download MyPDF. The password to open it is “bim.”

There are so many things you can do with a 3D PDF. You can use it for project information sheets, for construction administration, to create an archive of projects, send them to clients and consultants, or use them in marketing materials.

3D PDFs were, and still are, an under appreciated technology. 3D PDFs compress models to a size that is beyond belief – the 6.7M sample file is only 384kb as a PDF.

The 3D PDF Converter for Revit makes creating 3D PDFs simple. As a private consultant, I do not have a huge budget for additional add-ins, but the plug-in is affordable. Currently you can get it for $99, but even full price it is only $150. My examples were done in Revit Architecture, but the plug-in also works with Revit MEP and Structure.

Here are some PDF samples of 3D models made with 3D PDF Converter for Revit.
rac_basic_sample_project

rme_advanced_sample_project_MEP

rst_advanced_sample_project_ST1

About these ads

2 Responses to “3D PDF Converter for Revit”

Trackbacks/Pingbacks

  1. Architecture and Planning - July 9, 2012

    [...] This morning we came across an amazing article by Paul Crickard highlighting the uses and benefits of our 3D PDF Converter for Revit. It’s clear that Paul has an expert grasp of the architecture industry and is determined to keep the architecture community up to date on the elements that are presented today. If your in the dark about our 3D PDF Converter and would like information (with examples) to see what its all about, we strongly recommend visiting Paul’s article on our product. You can view the article here! [...]

  2. OpenLayers and Revit « Architecture and Planning - July 16, 2012

    [...] OpenLayers, using an Image Layer, can also display an Ortho of your model. While I would prefer a 3D PDF, this may have its [...]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 33 other followers

%d bloggers like this: